How To Use Breville Barista Touch

Breville Barista Impact Instruction Manual

BREVILLE RECOMMENDS SAFETY FIRST

At Breville we are very safety witting. Nosotros blueprint and manufacture consumer products with the safety of you, our valued customer, foremost in mind. In addition we ask that you lot practise a caste of care when using whatever electric appliance and attach to the following precautions.

IMPORTANT SAFEGUARDS

READ ALL INSTRUCTIONS BEFORE Use AND Salvage FOR Futurity REFERENCE

• Advisedly read all instructions before operating and salve for future reference.
• Do not touch on hot surfaces. Use handles or knobs every bit brash in this instruction volume.
• To protect confronting fire, electric stupor and injury to persons do not immerse the power cord, plug, or apparatus itself in water or other liquids.
• Close supervision is necessary when any appliance is used by or near children.
• If the appliance is to be: left unattended
  • cleaned
  • moved
  • assembled or
  • stored
    Always switch off the appliance past pressing the POWER push button to off and unplug from the power outlet.
• Always allow the appliance to cool before cleaning, moving or storing.
• It is recommended to regularly audit the appliance and ability string. Exercise non employ the appliance if there is damage to the power cord or plug, or after the appliance malfunctions or has been damaged in any way. Immediately end use and call Breville Consumer Support.
• The use of accessory attachments not recommended by Breville may result in fire, electrical shock or injury to persons.
• Do non let the power cord hang over the edge of a tabular array or counter-top, or touch hot surfaces
• Do non place the appliance almost the border of a table or counter-top. Ensure the surface is level, clean and free of water and other substances.
• Do not place the appliance on or about a hot gas or electric burner. Exercise not place information technology in, or allow it to come in contact with a heated oven.
• Do not operate the appliance if information technology is in an enclosed space, or within a cupboard.
• This appliance is recommended for household utilize simply. Exercise non utilise this apparatus for anything other than its intended utilize. Do not use outdoors. Do not use in moving vehicles or boats.

SPECIFIC INSTRUCTIONS FOR BES880

• It is recommended to plug the espresso machine into a properly grounded and dedicated excursion, split up from other electrical appliances.
• Avoid contact with moving parts.
• Check bean hopper for presence of foreign objects earlier using.
• Utilize only cold h2o in the water tank. Do non employ any other liquids. Exercise non use highly filtered, demineralized or distilled water as this may affect the sense of taste of the coffee and how the espresso auto operates.
• Ensure the portafilter is firmly inserted and secured into the grouping head before starting an extraction. Never remove the portafilter during the extraction process.
• Utilize circumspection after milk texturing as the auto purge function will purge hot steam when the steam wand is lowered.
• Caution must be used during descaling every bit hot steam may be released. Before descaling, turn off the machine, allow to cool for at to the lowest degree ane hour and ensure the baste tray is empty and fully inserted. For instructions, refer to 'Descale', page 21
• Practise non endeavour to open or service the espresso car.
• For whatever maintenance other than cleaning, call Breville Consumer Support or visit a Breville Authorized Servicer.

SPECIFIC INSTRUCTIONS FOR H2o FILTER

•  Filter cartridge should be kept out of achieve of children.
• Shop filter cartridges in a dry out identify in the original packaging.
• Protect cartridges from rut and direct sunlight.
• Do not employ damaged filter cartridges.
• Do non open filter cartridges. · If you are absent for a prolonged period of time, empty the water tank and replace the cartridge.

Curt CORD INSTRUCTIONS

Your Breville appliance is fitted with a short  power cord to reduce personal injury or holding damage resulting from pulling, tripping or becoming entangled with a longer cord. Longer detachable ability cords or extension cords are available and may exist used if care is exercised. If an extension cord is used,

1. the marked electric rating of the cord set up or extension string should be at least as great as the electrical rating of the appliance,
2. the cord should be bundled so that it will not curtain over the counter-top or table where it can exist pulled on by children or tripped over unintentionally and
3. the extension cord must include a three-prong grounding plug.

BREVILLE Assistance® PLUG

Your Breville appliance comes with a unique Aid® Plug, conveniently designed with a finger hole to ease removal from the power outlet.

FOR HOUSEHOLD USE But Save THESE INSTRUCTIONS

Components

1. ½lb bean hopper With locking system for easy removal, storage and transfer of coffee beans.
2.  Integrated conical burr grinder
3.  Impact screen control console Displays current settings and provides touch on interface.
4.  GRIND SIZE selector Espresso grind settings from fine to coarse.
5.  Power button
6.  Integrated removable 54mm tamper
7. Grind outlet
8. Hands gratuitous grinding cradle
9. 54mm stainless steel portafilter With commercial style spouts.
10. Removable moisture & dry coffee separator drip tray With Empty Me! tray full indicator.
11. 68 fl.oz (2L) removable water tank With replaceable water filter to reduce impurities and scale.
12. Grouping Head
13. Dedicated hot water outlet
14. Extra-tall cup clearance for tall mugs
15. Easy clean steam wand For automated milk texturing.
16. Milk temperature sensor
17. Storage tray (located behind baste tray) Houses accessories when non in utilize.

All parts of the Barista TouchTM that come into contact with coffee, water and milk are BPA Free.

ACCESSORIES

1.  Stainless steel milk jug
   
2. Cleaning disc
   
3.  Cleaning tablets
   
4. Dual Wall filter baskets (1 cup & 2 cup) Employ with pre-ground coffee.
   
   
5.  Single Wall filter baskets (1 cup & 2 cup) Use when grinding fresh whole coffee beans.
   
6. Water filter and holder
   
7. Cleaning brush
   
8. The RazorTM precision dose trimming tool
   
9. Steam wand cleaning tool
   
10. Water hardness exam strip
    

Barista Touch Features

COLOR Affect SCREEN CONTROL PANEL
Swipe & Select from the drinks bill of fare. Adjust your shot volume, milk texture or milk temperature, then save it as your personal favorite.

Automated Easily Gratuitous MILK TEXTURING
Automatically textures milk to the selected temperature and mode from silky polish latté to creamy cappuccino. Automatic purge removes residual milk from the steam wand when returned to the downward position.

RAPID Estrus UP
Innovative heating organization achieves platonic extraction temperature in 3 seconds.

INTEGRATED CONICAL BURR GRINDER
Stainless steel conical burrs maximize ground coffee expanse for a total espresso flavor. Upper and lower burrs are removable for cleaning.

Adaptable GRIND SIZE
Espresso grind settings from fine to coarse for optimal extraction.

Adaptable GRIND Amount
Conform the amount of fresh basis coffee dosed into the filter handbasket to suit the fineness or coarseness of the grind.

Automated DOSING
Apply the FILTER SIZE push button to tell the machine if you are using a one Cup or 2 Loving cup filter basket. The grinder will dispense the required amount of basis java for a single or double cup dose.

HANDS FREE GRINDING
Car stop for easily gratis grinding directly into the portafilter.

THE RAZORTM DOSE TRIMMING TOOL
Patented twist blade trims down the puck to the right level for precision dosing and a consistent extraction.

Adaptable TEMPERATURE Command
For optimum coffee flavour.

PID TEMPERATURE CONTROL
Electronic PID temperature control for increased temperature stability.

INSTANT HOT WATER
Defended hot h2o outlet for making Americanos and pre-heating cups.

Depression Pressure level PRE-INFUSION
Applies low h2o force per unit area at the start of the extraction to gently aggrandize grinds for an even extraction.

VOLUMETRIC Control
Preset i & 2 cup volumes, manual over-ride or programmable shot volumes.

Dry out PUCK Characteristic
Removes excess water from the ground java in the filter handbasket later on extraction for easy disposal of the coffee puck.

Associates

BEFORE FIRST Apply

Machine Preparation
Remove and discard all labels and packaging materials attached to your espresso machine. Ensure yous accept removed all parts and accessories before discarding the packaging. Remove the packaging and the plastics numberless containing the water filter and water filter holder. Clean parts and accessories (h2o tank, portafilter, filter basket, jug) using warm h2o and a gentle dish washing liquid. Rinse well so dry thoroughly.

INSTALLING THE Water FILTER

Notation
Replacing the water filter after three months or ten.6 USgal / 40L volition reduce the need to descale the machine. Filter can be purchased at Breville webpage.

Note
Exercise Not use highly filtered, demineralised or distilled water in this automobile. This may impact the taste of the coffee.

Functions

Outset Apply

1. Printing Ability push to turn the machine on.
2. Follow the instructions on screen to guide you through kickoff use setup.
3. After completing setup, the machine will tell that information technology is fix to use. Your Barista Touch is now set up Select the guide to find out more almost your Barista Touch or leave to proceed to your drink selection
   
4. Bear on "Guide" and the auto will guide you step past step to make your first java. Affect theand become to the Drinks Carte or to repeat the Setup. To repeat the Guide at whatever time, go to Settings Bill of fare.

Note
If your h2o hardness is either 4 or 5 when tested, we strongly recommend you lot change to an alternate water source.

Filtered, bottled spring or mineral water will extend both the life of your built-in filter and descale intervals as well as superior taste. Please ensure to exam the h2o hardness of the alternative water source you've chosen and input into the machine accordingly. Avert using overly filtered h2o, similar RO water unless some mineral content is being added dorsum to the final h2o. Never use distilled water, or water with no or depression mineral content as this volition affect both the taste.

GRINDING OPERATION
Insert edible bean hopper into position on-top of the motorcar. Turn dial to lock into identify. Make full hopper with fresh beans.

TIP
Nosotros recommend quality 100% Arabica beans with a 'Roasted On' date stamped on the bag, not a 'Best Before' or 'Utilise By' date. Coffee beans are best consumed between 5­20 days afterwards the 'Roasted On' date. Stale java may cascade besides quickly from the portafilter spouts and taste bitter and watery.

DRINK Choice
To enter Drinks Carte screen, bear on the Dwelling icon . Swipe & select your beverage. Touch the 'Help & Tip' icon to see Barista TouchTM Guide.

Notation Please keep the touch on screen dry and make clean to ensure that the auto functions properly.

DRINK SCREEN
In this screen, you can customize your drink past touching the oval shaped buttons. Yous cannot adjust the Grind Size by touching the push, employ the dial on the side of the car.

SETTING GRIND SIZE

Selecting Your Filter Handbasket
Choose and insert the Filter Basket into the Portafilter for the number of coffees or strength y'all are making. Employ the Single Cup Filter Basket for making a single cup or a weaker tasting espresso. Use the Double Cup Filter Handbasket for making 2 cups or a stronger tasting espresso, usually for mugs or larger cups. See 'TIPS' for more detailed guide. In the touchscreen, select the chosen filter basket by touching the toggle option under the 'Grind' push. The grind size will touch on the charge per unit of h2o period through the java in the filter basket and the flavor of the espresso. When setting the grind size, it should be fine merely not also fine and powdery. When trying a new java, it may take 2 or 3 tries to place the correct grind size for your coffee. There are numbered settings on the touchscreen. The smaller the number, the finer the grind size. The larger the number, the coarser the grind size.

Automatic Dosing

•  Ensure the hopper is locked into position and is filled with fresh coffee beans.
•  Ensure the filter basket is completely dry out before placing the portafilter into the grinding cradle.
• Bear upon the 'Grind' button once, or button and release the portafilter to engage the grinding activation switch. Then allow fresh ground coffee to fill the portafilter.
• Grinding will automatically stop, however if you wish to finish grinding earlier the cycle has finished, push and release the portafilter.

Annotation
It is normal for the portafilter to announced overfilled with basis coffee.

Manual Dosing

• If you lot adopt to manually dose, with the portafilter inserted in the grinding cradle, push and agree the portafilter to appoint the grinding activation switch. Continue holding until the desired amount of ground coffee has been dosed.
• To stop grinding, release the portafilter. This will release the grinding activation switch and stop the grinding function.

Tamping the Ground Coffee

Trimming the Dose
The RazorTM precision dose trimming tool allows you to trim the puck to the correct level for a consistent extraction.

• Insert the RazorTM dose trimming tool into the filter handbasket until the shoulders of the tool rest on the rim of the basket. The blade of the dose trimming tool should penetrate the surface of the tamped coffee.
•  Rotate the RazorTM dose trimming tool back and forth while holding the portafilter on an angle over a knock box to trim off backlog coffee grinds. Your filter basket is at present dosed with the correct amount of coffee.
  
• Wipe excess coffee from the rim of the filter handbasket to ensure a proper seal is achieved in the group head.

Purging the Group Head
Before placing the portafilter into the grouping head, run a brusque flow of water through the group head past touching the 'Mash' button. This volition stabilize the temperature prior to extraction.

Inserting the Portafilter
Place the portafilter underneath the group head then that the handle is aligned with the INSERT position. Insert the portafilter into the grouping head and rotate the handle towards the middle until resistance is felt.
ESPRESSO EXTRACTION

Align portafilter handle with the INSERT position on the grouping head. Lift to insert portafilter into the group head and rotate towards the LOCK TIGHT position until resistance is felt.

Touch the 'Brew' button on the display to start extraction. You can switch between unmarried shot, double shot or Custom by touching the 'Single', 'Double' or Custom button. The duration times are preset, but can be customized.

MANUAL OVERRIDE

Press and hold the 'Brew' button (approx 2secs) to enter manual extraction fashion. Touch the Mash push button to start the extraction, touch the Brew push button to cease the extraction.

Notation

•  The corporeality of espresso extracted in the cup will vary depending on your grind size and grind amount settings.
•  Touching the 'Brew' button during a preset shot volume will immediately finish the extraction.
•  For optimal season when using a one Loving cup filter basket, you should extract approx. 1oz / 30ml. When using a two CUP filter basket, you should extract approx. 2oz / 60ml.

TEXTURING MILK

Dissimilar brands and types of milk and milk alternatives will texture differently. You lot may demand to suit the froth level accordingly. Commencement with fresh cold milk. Fill up milk jug to below the spout position. Lift steam wand and insert into milk jug. Lower steam wand, ensuring it is fully down. The milk jug should rest on the milk temperature sensor located on the drip tray and milk should cover the ring effectually steam wand tip. The toggle push button nether the 'Milk' push will show yous whether yous placed the milk jug correctly.

Notation
Use the indicator on the screen for the correct milk jug position. Under the 'Milk' push button, temperature level and froth level are displayed. They are preset based on the drinkable you've called but y'all can customize past touching those options. To start, impact the 'Milk' button. The screen will display the temperature of the milk every bit it heats. Milk texturing volition stop automatically when the selected milk temperature is reached. Lift steam wand to remove milk jug. Wipe the wand & tip with a clean clammy cloth. Lower steam wand to the downward position and the wand will automatically purge.

Notation
Prior to texturing milk, it is recommended to momentarily purge the steam wand by starting time touching the 'Milk' push button. Touching the button again will finish steam delivery.

Manual MILK TEXTURING
Automobile milk texturing and automobile shut-off are disabled during manual milk texturing mode. Lift the steam wand. Commencement frothing past touching the button. When frothing is done, touch the Milk push to cease. Wipe the wand & tip with a make clean damp cloth. Lower steam wand to the down position and the wand will automatically purge.

CAUTION: Burn Chance
Pressurized steam tin can withal exist released, fifty-fifty subsequently machine has been switched off. Children must ever be supervised.

  NOTE

•  When the automobile creates steam, a pumping noise tin can be heard. This is the normal operation of the Italian pump.
•  Later 90 seconds of continuous steaming, the car volition automatically disable the steam function.
•  Employ exclusively the stainless steel milk jug included in the pack to froth milk. The use of container fabricated of glass or plastic material to barm milk may lead to dangerous weather condition.

AMERICANO
There are iii preset Americano settings ­ Small (6oz / 180ml), Medium (8oz / 240ml), and Large (12oz / 360ml). Grind dose & tamp your portafilter & insert into the group head. Position your loving cup underneath the portafilter spouts & the hot water spout. The hot h2o is delivered first, and espresso will be extracted subsequently that.

HOT Water

The HOT WATER function can exist used to preheat cups or add together hot water manually. To start & stop hot water, touch 'Hot Water' on the screen., Hot water limit is approximately xc seconds. Depending on the size of your cup, you may need to touch the 'Hot Water' button to stop pouring.

NOTE
Yous cannot run hot water and excerpt espresso at the same time.

Adding NEW DRINK
Touch 'Add together New' in the carte screen to create a customized drink. You lot tin conform parameters based on a standard style and save your own
.
Alternatively, after manually adjusting parameters touch the small icon to relieve the current setting.

TIPS
Ensure the drip tray is firmly pushed in place and emptied whenever the Empty Me! indicator is displayed.

Motorcar OFF MODE
The machine automatically switches to AUTO OFF manner afterwards 30 minutes.

SETTINGS
To enter settings menu, touch the icon on the upper right of the screen. Quick Start Guide Automobile volition guide you on screen, pace by step to brand an actual java.

Language and units
Switch the linguistic communication between English and French, and unit between °F and °C.

Clean Cycle
The Cleaning Cycle cleans the shower screen and back-flushes the group head.

Cleaning Steam Wand
This volition evidence how to make clean the steam wand to remove any blockage for improve steaming performance.

Descale Bicycle
Descaling prevents excess mineral and scale build-up. A popular-up message will let you know when it is time for descaling.

Mash Temperature
Information technology allows you lot to adjust the recommended extraction temperature.

Default Milk Temperature
It allows you to conform default temperature level on all milk base of operations drinks.

Water Hardness
It is to test h2o to ready how oft you demand to descale the auto.

Screen Effulgence
Y'all can arrange brightness of your bear on screen.

Sound Volume
Yous tin adapt volume for alerts and reminders.

Demo Mode
Information technology is for on-screen Barista TouchTM sit-in sequence.

Manufactory Reset
Employ this function to reset all programmable values back to the factory settings and delete all custom drinks.

Tips

PRE-HEATING

Heating your cup or glass
A warm cup will help maintain the coffee'due south optimal temperature. Preheat your cup by rinsing with hot water from the hot water outlet and identify on the cup warming tray.

Heating the portafilter and filter basket
A cold portafilter and filter basket tin reduce the extraction temperature enough to significantly affect the quality of your espresso. Always ensure the portafilter and filter basket are pre-heated with hot water from the hot water outlet earlier initial utilise.

Note
Ever wipe the portafilter and filter basket dry before dosing with ground coffee equally moisture can encourage `channeling' where waterbypasses the ground coffee during extraction.

SELECTING A FILTER BASKET

Unmarried Wall Filter Baskets
Apply Single Wall filter baskets if grinding fresh whole coffee beans. Single Wall filter baskets allow you lot to experiment with grind, dose and tamp to create a more

Dual Wall Filter Baskets
Utilise Dual Wall filter baskets if using pre-ground coffee. Dual Wall filter baskets regulate the pressure level and help to optimize the extraction regardless of the grind, dose, tamp pressure level or freshness.

NOTE

• Regardless of whether you utilise Single Wall or Dual Wall filter baskets, use the 1 Cup basket when brewing a single cup and the 2 CUP handbasket when brewing ii cups or a stronger unmarried loving cup or mug.
• You will need to adjust the grind amount and size if switching from a single basket to a double basket, or vice versa.

The provided filter baskets are designed for:
1 Cup handbasket = approx. 8­10g.
two Cup basket = approx. 15­18g.

Notation
You may demand to experiment with how much coffee is inserted into the filter basket or how long the grinder needs to run to achieve the right dose. For case, when using a finer espresso grind with the Unmarried Wall filter baskets, you may need to increase the grind amount to ensure the filter handbasket is correctly dosed.

THE GRIND
If grinding coffee beans, the grind size should exist fine but non too fine. The grind size volition affect the rate at which the water flows through the ground coffee in the filter basket and the gustatory modality of the espresso. If the grind is too fine (looks like powder and feels similar flour when rubbed between fingers), the h2o will not flow through the coffee fifty-fifty when under pressure. The resulting espresso volition be OVER EXTRACTED, nighttime in colour and biting in flavor. If the grind is as well fibroid the water will flow through the footing coffee in the filter basket too chop-chop. The resulting espresso will be Under EXTRACTED and lacking in colour and flavor.

EXTRACTING ESPRESSO

•  Place pre-warmed cup(due south) beneath the portafilter and touch the 'Brew' button for the desired volume.
• Due to pre-infusion fourth dimension, the espresso will not commencement to period immediately.

A great espresso is about achieving the perfect residual between sweetness, acidity and bitterness. The flavor of your coffee will depend on many factors, such as the blazon of coffee beans, degree of roast, freshness, coarseness or fineness of the grind, dose of basis java, and tamping pressure. Experiment by adjusting these factors but one at a fourth dimension to achieve the gustatory modality of your preference.

EXTRACTION GUIDE

Right EXTRACTION

•  Flow starts after 8-­12 secs
• Period boring like warm dearest
• Crema is golden brown with a fine mousse texture
• Espresso is dark brown
  

UNDER EXTRACTION

•  Catamenia starts later 1­-7 secs
• Menses fast like water
• Crema is thin and pale
• Espresso is pale brown
• Tastes bitter/sharp, weak and watery
  

OVER EXTRACTION

• Menstruum starts afterwards 13 secs
• Flow drips or non at all
• Crema is dark and spotty
• Espresso is very nighttime brown
• Tastes biting and burnt
  

Afterward EXTRACTION

REMOVE USED GRINDS
Used grinds will class a java 'puck'. If the puck is wet, refer to the 'Under Extraction' section.

RINSE FILTER Handbasket
Keep the filter handbasket clean to forestall blockages. Without ground coffee in the filter basket, lock the portafilter into the motorcar and run hot h2o through by pressing single or double cup.

SOLUTIONS

Tamp using thirty­40lbs (15­20kgs) of pressure level. The summit edge of metal cap on the tamper should be level with the top of the filter handbasket Later on tamping.
Trim the puck to the right level using the RazorTM precision dose trimming tool.

Tamp using xxx­40lbs (15­20kgs) of pressure. The top border of metallic cap on the tamper should be level with the top of the filter handbasket AFTER tamping.
Trim the puck to the right level using the RazorTM precision dose trimming tool.

	GRIND	GRIND DOSE	TAMP
OVER EXTRATED Bitter ASTRINGENT	Too fine	Too much Use razor to trim	Too heavy
Balanced	Optimum	eight–10g (1 cup) 15–18g (2 cup)	xxx–40lbs (fifteen–20kg)
UNDER EXTRACTED UNDERDEVELOPED SOUR	Besides coarse	Too little Increase dose & use razor to trim	Too calorie-free

HINTS & TIPS

•  Fresh, quality java beans volition give you the all-time possible extraction.
•  Nosotros recommend quality 100% Arabica beans with a `Roasted On' date stamped on the bag, non a `Best Before' or `Use Past' engagement.
•  Java beans are best consumed between 5­20 days after the `Roasted On' engagement. Ideally only grind directly before the extraction to maximize flavor.
•  Buy java beans in modest batches to reduce the storage time.
•  Shop coffee beans in a cool, night and dry container. Vacuum seal if possible.

TEXTURING MILK
There are ii phases to texturing milk. The first is stretching the milk to aerate it and the 2d is swirling the milk to make it silky smooth. These two operations should blend into one.

•  Always kickoff with fresh cold milk.
•  Fill up milk jug to below the spout position. At a minimum, there should exist enough milk to embrace the ring effectually steam wand.
•  To remove whatsoever condensed h2o from the system, ensure the steam wand is in the downwards position over the drip tray and so touch the Milk button, let steam to menses for a few seconds, and so bear on the Milk button to finish.
•  When texturing milk automatically, ensure the steam wand is fully downward

For optimum milk texturing performance it is critical that the holes effectually the steam tip are clear. Even partially blocked holes may affect the power of the steam wand to produce sufficient foam.

E'er wipe the wand and tip with a damp cloth Before returning the wand to the downwardly position. Wiping the wand will remove the bulk of milk and let the automatic purge feature to more effectively remove whatsoever residual milk.

Later on texturing is complete

•  Tap the jug on the counter-summit to collapse whatsoever bubbles.
•  Swirl the jug to polish and re-integrate the texture.
•  Pour milk directly into the espresso.
•  The key is to piece of work quickly, earlier the milk begins to split.

For transmission texturing

•  Lift the steam wand and insert the steam tip 0.4-0.8 inch / one-2 cm below the surface of the milk shut to the right hand side of the jug at the 3 o'clock position. Enter manual frothing mode by pressing and holding the 'Milk' push (approx 3secs), and then beginning frothing by touching the push once once more.
•  Proceed the tip just under the surface of the milk until the milk is spinning clockwise, producing a vortex (whirlpool result).
•  With the milk spinning, slowly lower the jug. This will bring the steam tip to the surface of the milk & start to introduce air into the milk. You may have to gently pause the surface of the milk with the tip to get the milk spinning fast enough.
•  Keep the tip at or slightly below the surface, continuing to maintain the vortex. Texture the milk until sufficient volume is obtained.
•  Lift the handle of the jug to lower the tip beneath the surface, but keep the vortex of milk spinning. Utilise the touch screen to monitor the milk temperature. We recommend 130°F-150°F / 55°C­65°C.
•  Touch the Milk button to cease steaming BEFORE lowering the jug and taking the tip out of the milk.

ADJUSTING CONICAL BURRS
Some types of coffee may require a wider grind range to achieve an ideal extraction or brew. A feature of your Barista TouchTM is the ability to extend this range with an adaptable upper burr. We recommend making only one adjustment at a time.

Unlock hopper

Hold hopper over container & turn dial to release beans into container

Align hopper into position

Run grinder until empty

Remove hopper Remove upper burr

Remove wire handle from both sides of the burr

Move adjustable acme burr, 1number, coarser or effectively

Align the number with the handle opening

Insert wire handle from both sides of the burr

Button upper burr firmly into position

Lock upper burr

Align hopper into position

Lock hopper

Cheque your extraction

Intendance & Cleaning

COLOR Touch SCREEN Display
Please keep the touch screen dry out and make clean to ensure that the machine functions properly.

REPLACING THE WATER FILTER

Ready electric current month

Soak Filter for five min

Assemble water filter parts

Ensure parts Install filter are connected

Install water tank in tank

Install water tank

Supplant filter after 90 days or later 40L

The provided water filter helps prevent scale build-up in and on many of the inner functioning components. Replacing the water filter afterwards three months or 10.6 USgal / 40L will reduce the need to descale the motorcar. The limitation of 10.half dozen USgal / 40L is based on h2o hardness level iv. If yous are in level 2 area, you can increment this to 16 USgal / 60L.

NOTE
To purchase h2o filters visit Breville webpage.

CLEANING Bicycle
There will exist a message prompt when a cleaning cycle is required. This is a back-flushing cycle and is separate from descaling. Follow the pedagogy on the screen.

DESCALING
Afterward regular utilise, hard water tin cause mineral build upwardly in and on many of the inner performance components, reducing the brewing flow, brewing temperature, power of the machine, and taste of the espresso. Even if you used the provided h2o filter, nosotros recommend you to descale if in that location is scale build-up in the water tank. Go to 'Settings' and select 'Descale cycle'. Follow the instructions on the screen.

Warning
Practise non immerse power cord, power plug or apparatus in water or any other liquid. The h2o tank should never be removed or completely emptied during descaling.

CLEANING THE CONICAL BURR GRINDER
This grinder cleaning cycle removes oil build-up on the burrs which tin can impede operation.

Unlock hopper

Empty hopper

Supersede hopper

Lock hopper

Run grinder empty

Unlock hopper

Remove hopper

Unlock meridian burr

Remove height burr

Clean top burr with brush

Clean lower burr with castor

Clean chute with brush

ADVANCED CLEANING FOR THE CONICAL BURR GRINDER
This step is only required if there is a blockage betwixt the grinding burrs and the grinder outlet.

Remove hopper

Set 'GRIND SIZE' to 'one' (finest)

Apply 10mm socket. Rotate 'Clockwise' to loosen the nut only

Set up 'GRIND SIZE' Unlock & remove to '30' (coarsest)

Unlock & remove peak burr

Remove nut, spring & flat washer. Carefully remove lower burr

Remove grind fan & washers using long-nose pliers

Unblock the grinds exit chute using the brush or a pipe cleaner

Clean chute with castor

Insert washers & grind fan using long-nose pliers

Insert lower burr (drive pin & cavity to align). Insert flat washer & jump washer

Rotate 'CounterClockwise' to tighten nut

Insert & lock top burr

Set 'GRIND SIZE' to '15'. Replace & lock hopper

Warning
Intendance should be taken as the grinder burrs are extremely sharp.

CLEANING THE STEAM WAND

•  The steam wand should ever exist cleaned later texturing milk. Wipe the steam wand with a clammy material.
•  If any of the holes in the tip of the steam wand become blocked, it may reduce frothing performance.
•  Go to 'Settings' > 'Steam wand cleaning' and follow the guide on the screen.

CLEANING THE FILTER BASKETS AND PORTAFILTER

•  The filter baskets and portafilter should be rinsed nether hot h2o immediately later on use to remove all rest coffee oils.
• If any of the holes in the filter basket get blocked, employ the pivot on the end of the provided cleaning tool to unblock the pigsty(s).
•  If the hole(s) remain blocked, dissolve a cleaning tablet in hot water and soak filter basket and portafilter in solution for approx. 20 minutes. Rinse thoroughly.

CLEANING THE SHOWER SCREEN

• The group head interior and shower screen should exist wiped with a clammy cloth to remove whatsoever footing coffee particles.
•  Periodically purge the machine. Place an empty filter basket and portafilter into the group head. Affect the 'Brew' button and run a short menstruation of h2o to rinse out any rest coffee.

CLEANING THE Drip & STORAGE TRAY

•  The drip tray should exist removed, emptied and cleaned at regular intervals, peculiarly when the drip tray full indicator is showing EMPTY ME!
•  Remove the grid from the drip tray. Lift the coffee grind separator and dispose of any coffee grounds. The EMPTY ME! indicator can besides be removed from the drip tray past pulling upwards to release the side latches. Wash all parts in warm soapy water with a soft cloth. Rinse and dry thoroughly.
•  The storage tray (located backside the baste tray) tin can be removed and cleaned with a soft, damp cloth. Do not use abrasive cleansers, pads or cloths which tin can scratch the surface.

NOTE
All parts should be cleaned past paw using warm water and a gentle dish washing liquid. Do not employ abrasive cleansers, pads or cloths which tin scratch the surface. Do not clean any of the parts or accessories in the dishwasher.

CLEANING THE OUTER HOUSING & Loving cup WARMING TRAY
The outer housing and cup warming tray tin be cleaned with a soft, damp fabric. Polish with a soft, dry fabric. Do not use abrasive cleansers, pads or cloths which can scratch the surface.

STORING YOUR Auto
Before storing, press the POWER button to switch the auto off and remove the plug from the power outlet. Remove unused beans from the hopper, clean the grinder (see page 23), empty the water tank and the drip tray. Ensure the machine is absurd, clean and dry. Insert all accessories into the storage tray. Store upright. Do not place annihilation on peak.

WARNING
Do not immerse power cord, power plug or appliance in water or any other liquid.

REPLACING THE SILICONE SEAL
Over time, the silicone seal surrounding the shower screen will demand to be replaced to ensure optimum brewing performance.

1.  Printing the Ability push button to switch the motorcar off and unplug the cord from the power outlet.
2. Carefully remove the h2o tank and drip tray, taking item intendance if they are full.
3.  Using a skewer or similar, clean the center of the screw of any residual java.
4. Insert a flat head screwdriver into the heart of the screw. Turn counter-clockwise to loosen the spiral.
   
5. Once loosened, carefully remove and retain the screw and the stainless steel shower screen. Make note of the side of the shower screen that is downwards. This will brand re-assembly easier. Wash the shower screen in warm soapy h2o, then dry thoroughly.
6. Remove the silicone seal with your fingers or a pair of long-nose pliers. Insert the new seal, flat side first, and then the ribbed side is facing you. Clean center of screw before inserting flat head screwdriver.
   
7. Re-insert the shower screen, then the screw. With your fingers, plough the screw clockwise for 2-3 revolutions so insert flat head screwdriver to tighten until the spiral is affluent with the shower screen. Do non overtighten screw.
8. Re-insert the drip tray and h2o tank.

Contact Breville Consumer Support or visit the Breville webpage for replacement silicone seals or for communication.

TRANSPORTING AND STORING
Press the POWER button to switch the machine off and remove the plug from the power outlet. Remove unused beans from the hopper, clean the grinder, empty the h2o tank and the drip tray. Ensure the machine is cool, clean and dry out. Insert all accessories into the storage tray. Shop upright. Do not place anything on top.

Troubleshooting

Problem	POSSIBLE CAUSES	Easy SOLUTION
Water does not flow from the group head. No hot water.	Water tank is empty	Fill tank.
	H2o tank is non fully inserted and locked into position.	Push h2o tank down completely to lock into place.
	Car needs to be descaled.	Perform descale cycle.
	Coffee is ground too finely and/ or as well much java in filter basket and/or over tamping and/or filter basket is blocked.	Run into below, 'Espresso simply drips from the portafilter spouts or not at all'.
Espresso simply drips from the portafilter spouts or not at all.	Coffee is ground too finely	Use slightly coarser grind. Refer to 'Setting the Grind Size', and 'Over Extraction'.
	Also much coffee in the filter handbasket	Lower dose of coffee. Refer to 'Dosing', folio 12 and 'Over Extraction', page 18. Later on tamping, trim the coffee dose using the Razor™ dose trimming tool.
	Java tamped also firmly.	Tamp between thirty–40lbs or 15–20kg of pressure.
	Water tank is empty.	Fill up tank
	H2o tank is non fully inserted and locked into position.	Push water tank down completely to lock into identify.
	The filter handbasket may be blocked	Use the pin on the end of the provided cleaning tool to unblock the hole(s). If the hole(s) remain blocked, dissolve a cleaning tablet in hot water and soak filter basket and portafilter in solution for approx. 20 minutes. Rinse thoroughly.
	Auto needs to be descaled.	Perform descale cycle.
Espresso runs out too apace.	Coffee is footing too coarsely	Use slightly effectively grind. Refer to 'Setting the Grind Size', and 'Under Extraction'.
	Not plenty coffee in the filter basket.	Increase dose of coffee. Refer to 'Dosing', and 'Under Extraction'. Tamp then utilise the Razor™ dose trimming tool to trim off backlog java.
	Java tamped also lightly.	Tamp between 30–40lbs or xv–20kg of force per unit area.
Espresso runs out around the edge of the portafilter.	Portafilter not inserted in the group caput correctly.	Ensure portafilter is completely inserted and rotated until resistance is felt.
	At that place are coffee grounds effectually the filter basket rim.	Clean excess coffee from the rim of the filter basket to ensure a proper seal in group head.
	As well much coffee in the filter basket	Lower dose of coffee. Refer to 'Dosing'. After tamping, trim the coffee dose using the Razor™ dose trimming tool.
	The silicone seal surrounding the shower screen needs to exist replaced to ensure the portafiler is properly secured into the group head.	Refer to 'Replacing the Silicone Seal'.
No steam.	Auto has not reached operating temperature.	Allow time for the machine to accomplish operating temperature.
	Water tank is empty	Fill tank.
	Water tank is non fully inserted and locked into position.	Push water tank down completely to lock into place.
	Machine needs to exist decalcified.	Perform descale wheel.
	Steam wand is blocked.	Refer to 'Cleaning the Steam Wand'.
Pulsing/pumping sound while extracting espresso or steaming milk.	The machine is carrying out the normal performance of the pump.	No activity required equally this is the normal operation of the auto.
	Water tank is empty	Fill tank.
	Water tank is non fully inserted and locked into position.	Push button water tank down completely to lock into identify.
Coffee not hot enough.	Cups not pre-heated.	Rinse cups under hot h2o outlet and place on loving cup warming tray
	Portafilter not pre-heated.	Rinse portafilter under hot h2o outlet. Dry thoroughly
	Milk not hot enough (if making a cappuccino or latté etc).	Make certain sensor is in contact. Suit milk temperature setting on screen..
	Water temperature needs to be adjusted.	Increment the brew temperature in 'Settings' menu
No crema.	Java tamped too lightly.	Tamp betwixt xxx–40lbs or 15–20kg of pressure level.
	Coffee is footing too coarsely	Employ slightly finer grind. Refer to 'Setting the Grind Size', page 12 and 'Under Extraction', page eighteen.
	Coffee beans or pre-ground coffee are non fresh.	If grinding fresh whole coffee beans, use freshly roasted coffee beans with a 'Roasted On' engagement and consume betwixt 5–20 days after that engagement. If using pre-ground coffee, employ within a calendar week of grinding
	The filter basket may be blocked.	Use the pin on the end of the provided cleaning tool to unblock the hole(due south). If the pigsty(s) remain blocked, dissolve a cleaning tablet in hot water and soak filter basket and portafilter in solution for approx. 20 minutes. Rinse thoroughly
	Unmarried Wall filter baskets are existence used with pre-ground coffee.	Ensure you apply Dual Wall filter baskets with pre-footing java.
H2o leaking.	Auto purge feature. Immediately afterwards the espresso, hot water and steam functions, the automobile volition purge h2o into the drip tray. This ensures the thermocoil is at the optimal temperature.	Ensure the drip tray is firmly pushed in place and emptied whenever the Empty Me! indicator is displayed.
	Water tank is not fully inserted and locked into position.	Push water tank downward completely to lock into identify.
	The silicone seal surrounding the shower screen needs to be replaced to ensure the portafiler is properly secured into the group caput.	Refer to 'Replacing the Silicone Seal'.
Car is on but ceases to operate	The safety thermal-cut out may have activated due to the pump or grinder overheating	Press the POWER button to switch the machine off and unplug from the power outlet. Allow to cool for about 30–60 minutes. If trouble persists, telephone call Breville Support.
No footing coffee coming from grinder	No coffee beans in hopper	Filler hopper with fresh coffee beans.
	Blocked grinder sleeping accommodation or chute.	Clean and clear grinder sleeping room and chute. Refer to 'Advanced Cleaning for the Conical Burr Grinder'.
	Water / wet in grinder sleeping accommodation and chute.	Clean and clear grinder chamber and chute. Refer to 'Advanced Cleaning for the Conical Burr Grinder'. Ensure burrs are thoroughly dry before re-assembling. It is possible to utilize a hair dryer to blow air into the grinder chamber.
Too much/too piddling basis coffee is existence delivered to the filter basket.	Grind amount settings are wrong for particular grind size.	Use the grind elapsing push button to increment or decrease the grind corporeality. Refer to 'Dosing', and 'Extraction Guide'.
Too much/too picayune espresso is being delivered to the cup	Grind corporeality and/or grind size settings and/or shot volumes require aligning.	Suit the grind amount and/or grind size settings. Refer to 'Setting the Grind Size', 'Dosing', and 'Extraction Guide'.
Grinder is making a loud noise.	Blockage or foreign object in grinder.	Remove hopper, bank check for debris or blockage. If necessary, make clean and clear grinder sleeping room and chute. Refer to 'Cleaning the Conical Burr Grinder'.

Documents / Resource

References

Source: https://manuals.plus/breville/barista-touch-manual

Share this post